This is my first time messing with Linux so please forgive my ignorance.

I have an HP Elitebook 840 G8 that I’ve installed Ubuntu server on. I was trying to install a GUI on it, so I tried pulling the SLiM package from the web, but got "Temporary Failure resolving ‘Archive.ubuntu.com’.

This laptop doesn’t have an Ethernet Port, so I have to use a Microsoft USB-Ethernet dongle. But I haven’t been successful in getting that to work.

Is there a way for me to manually download the driver on a USB, then load it that way?

  • SecretSauces@lemmy.worldOP
    link
    fedilink
    arrow-up
    0
    ·
    edit-2
    5 months ago

    ifconfig gives "command not found, but can be installed with sudo apt net-tools. That command gives me "Temporary failure resolving ‘archive.ubuntu.com

    ip addr gives:

    1: lo: <LOOPBACK, UP, LOWER_UP> mtu ##### qdisc noqueue state UNKNOWN group default qlen 1000
    
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    
    inet 127.0.0.1/8 scope host lo
    
    valid_lft forever preferred_lft forever
    
    inet6 ::1/128 scope host noprefixroute
    
    valid_lft forever preffered_lft forever
    
    2: wlp02s20f3: <BROADCAST, MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
    
    link/ether [MAC Address] brd [IPv6 MAC Address]
    
    4: enx949aa9857457: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
    
    link/ether [MAC Address] brd ff:ff:ff:ff:ff:ff
    
    
    • scrion@lemmy.world
      link
      fedilink
      arrow-up
      0
      ·
      5 months ago

      Your USB ethernet adapter is down according to this output.

      In case Ubuntu server comes with e. g. dhclient installed, you should be able to get a working network connection by ensuring a cable is properly plugged into your USB ethernet adapter and running

      sudo dhclient -v enx949aa9857457

      You might want to post the output of that command here. Alternatively, configure the USB adapter using one of the management tools mentioned in this thread already.