Hello! The TL;DR is:

I have an m.2 drive that is in a sturdy enclosure that has 1 TB. I have Ventoy with Medicat on there, with some backups of important data.

I still have a lot of room left on there, so I was thinking what else I could do, and the idea of basically installing a Linux Distro to a chunk of free space on there. Maybe Debian/Fedora or Arch.

Is there anything I should be aware of to help not break that system or rapidly kill the drive? It’s not a USB flash drive, it’s a M.2 drive that’s put on a small board that then allows it to talk via USB C/Thunderbolt.

EDIT: Just to be sure, if I use Ventoy’s EFI, do I need to be worried about a conflict with the bootloader of the Linux install?

  • Max-P@lemmy.max-p.me
    0·
    10 months ago

    Not really different than any other M.2 SSDs, that it’s over USB doesn’t matter.

    The only consideration for USB sticks is that they’re usually quite crap, so running a system off it tends to use up the flash pretty quickly.

    • gregorum@lemm.eeEnglish
      0·
      10 months ago

      The only consideration for USB sticks is that they’re usually quite crap, so running a system off it tends to use up the flash pretty quickly.

      not to mention that, due to the crap flash, they also tend to be quite slow and unreliable.

      • GenderNeutralBro@lemmy.sdf.orgEnglish
        0·
        10 months ago

        Definitely look for portable SSDs rather than flash drives. Different technology, usually significantly larger (physically). Easily saturates a USB 2.0 connection, so look for USB 3.0.

        Back when Microsoft supported Windows To Go, they had a short list of verified drives to use. Surely outdated now but might be a good starting point.

        FWIW I used to run Windows 10 off a Samsung T5. It worked fine, except that it would always shut down when I tried to suspend. Still works as far as I know, I just haven’t used it in a long time.

        • d3Xt3r@lemmy.nz
          0·
          10 months ago

          look for USB 3.0

          USB 3.0 (5 Gbps) is quite ancient by today’s standards. I’d recommend a USB 3.2 Gen 2x2 (20 Gbps) or even a USB 4.0 drive (20/40 Gbps) drive.

  • Dandroid@dandroid.app
    0·
    10 months ago

    I did this. I installed it just like usual. I did remove my existing SSD during the install so it wouldn’t install grub on my Windows SSD.

    My only complaint was that USB was too slow for everyday use. I can’t keep track of the USB versions anymore, but it was one of the 3.1s or 3.2s. Not sure what Gen or whatever. The connector was USB type C.