I was hoping someone could give a recommendation for a noob friendly distro that works well on my laptop, an HP Envy x360 Convertible 15m-es0xxx, i7 16 GB RAM. Thanks for your help and I apologize if these questions aren’t allowed here
everybody recommending mint skipped over the fact that this is a convertible, i.e. has touch. mint/cinnamon/mate isn’t terribly optimized in that regard and is rocking X11, a headache a beginner doesn’t need nowadays. mint is a phenomenal choice for older laptops, but not this one.
with a heavy heart, I’m recommending Ubuntu. it runs Gnome, which is a way more modern DE, runs on Wayland so has solid gestures and touch support, and lastly, it is very beginner friendly. you’ll be able to sort out any potential issue as that’s the most widely used distro and has solutions and tutorials for practically everything.
once you’ve crossed over and gain some experience, you’ll inevitably start banging your head on the ceiling (snaps and such). by then you’ll have enough experience and knowledge to move to something better.
The KDE spin of Fedora could be a good option if you want to avoid Canonical. KDE is also Wayland, though probably less touchscreen oriented than GNOME (which you can install on Fedora obviously, but a requirement to install a DE is not the most noob-friendly)
I’m gonna disagree on both counts.
I run fedora on my desktop and a bunch of laptops and have done so for years; I would never recommend it to a beginner, or even do the install and all the laborious post-install steps and then hand it over.
Plasma is closer to a standard desktop paradigm, but it has its stupid choices that aren’t welcome on a laptop - FOUR finger gestures, really? why?! also, it’s way too configurable so it’s super-easy to fuck up something without an easy way to reset it.
so, both the options you mentioned are natural progressions for an intermediate user, someone who started with an easy option like Ubuntu + Gnome, and then progressed because they don’t need the kiddie wheels no more; but not as first distro.
Noob friendly? Linux Mint. It’s not the prettiest, but it looks nice enough, especially if you tweak the themes a little, which is super easy.
It’s a fantastic all-around distro, and if you use the default Cinnamon desktop environment, it’s rock stable and super easy to navigate.
It’s what I use on all my personal laptops and also what I set my parents up with when I switched them from Windows to Linux.
https://www.youtube.com/watch?v=GxZf1-bLIHY
This is a pretty good start to make Mint (Cinnamon) look better.
Its basically mall built-in tools.
I ended up just putting icons in the middle (to prepare for works Win11 enshitification).
I also put a user button near the time to allow shutdown and removed the god awful power icons from the start menu (or whatever the app launcher is called).
Theres also an extend thin for a bigger start menu more like a grid but thats personal preference.
I think mint should do some of these things so its not so off putting. It held me back forming for so long but IRS much better.
I prefer mint over fedora. Fedora dosnt seem to have as many apps in the store. Yes you can use a terminal but thats not helping linux become mainstream, mint is.
+1 mint also prompts new users to setup timeshift backups.
I’d recommend Linux Mint generally for noobs. It’s popular and has lots of tips and advice available online, easy to find. It’s easy to install, and as it’s an Ubuntu derivative you get a lot of the benefits of the big user base without the downsides of Canonical (such as Snap being forced on you). I used to use Mint, and it’s a good stable daily driver.
In terms of your specs, you should have no problem with running it as laptop, but as a 2-in-1 device you may find some specialised drivers don’t work out of the box. The most common is finger print readers, but also some of the switching between Desktop and Tablet mode can be tricky. Having said that, I own a Toshiba Satellite 2-in-1, and I installed Linux without issue. I don’t and never have really used it as an actual Tablet though; it ended up being a gimmick too far for me - they’re just too heavy and cumbersome as a tablet, and even the touch screen (which works fine in linux) is just a bit pointless for me. However I have KDE on my Toshiba now and it works well as a 2-in-1 for me at least.
The best thing to do is flash a USB stick with Linux, for example Mint, and try it out to see how it works with your hardware “out of the box”. Linux Mint has a few spins for desktop environments: Cinnamon, XFCE and Mate. None of them are really designed to be Touch based interfaces to be honest. Cinnamon is the main/high end DE and it is ok with Touch interface.
I would say KDE and Gnome are better DEs for touch screen and convertible devices; I personally prefer KDE but both support Touch well - they just have different design ethos. Both can be installed in Mint, although as they’re not “main” DEs for the distro you sometimes get some minor janky integration of the Mint tools in the KDE or Gnome desktop (e.g. sometimes the task tray icons for Cinnamon based tools just aren’t as well integrated into the system themes of KDE & Gnome). You also can end up with duplicate apps in your app menus (cinnamon tools sitting alongside native KDE/Gnome tools which can be a little irritating). But the system works fine and a lot of these things can be tidied up if it bothers you.
But Mint is very Noob friendly, and I think it’s a good way to get into the Linux world. Pretty much everything can be done via the GUI, and it has opted for a default Windows-like feel which can really help with getting used to it. Cinnamon is also still pretty flexible for creating some other interfaces to experiment. Gnome is far removed from that windows feel and is also pretty rigid in it’s design philosophy - it’s kinda “take it or leave it”; personally I don’t like it. You can push it do other things though with extensions, so there is still potential to experiment. KDE does a good job of a default Windows feel but with more design flair/slicker feel, but it also has a huge range of options for making pretty much any interface you like. One reason I left Mint is because I wanted a distro which is built around KDE rather than me installing it separately (I’m on OpenSuSE Tumbleweed now).
So overall, I’d recommend Mint, and use the Cinnamon version. Flash a USB and try it out (note it will be slower/feel sluggish compared to a native install, but should give a feel for how it handles your hardware). If you install it, I’d also recommend a dual-boot setup rather than ditching Windows completely if you’re completely new to Linux. Another option is install on a portable SSD attached via USB, and don’t touch your actual hard drive. That way you can get a reasonable feel of an actual Linux system without messing up your laptop. It’ll still be slower than a true native install but generally faster than a live-USB stick (you can of course also partition and install a full install on a USB stick itself rather than an SSD for the same effect).
EDIT: Just worth saying; if you decide to install Linux, be very careful where you install it. Double and triple check, as the last thing you want to do is accidentally wipe your windows install!
Also potentially stupid fix: could it be the USB stick I’m using? I’m using a PNY 64 GB USB 3.2 Type C, do you think a regular Type A would be better?
I’m not sure if you’ll see this at this point but I’m running into a problem installing Mint and I was hoping you could offer some ideas.
When I get to the “Installation type” screen, I don’t have any options for how to partition. Anything I click on this screen crashes the installer. I’ve disabled secure boot but I can’t find any advice online for this specific problem for my laptop. Do you have any ideas?
Thank you!
I second Mint and I would add Pop!_OS by computer seller System76. They are both based on Ubuntu/Debian soif you ever need guides or downloads, anything for Ubuntu or Debian will work on Mint and Pop!_OS.
Personally I’d say if you’re coming from a Mac, go Pop!_OS. If you’re coming from Windows, go Linux mint. Both have the option to run from a USB to test before installing.
Thank you!
Sure it’s allowed, but we have these questions a lot, so some enthusiasts made some really great posts with tons of info, for example:
https://lemmy.ml/post/12123645
https://lemmy.ml/post/18268622
I’d recommend to read through them, then come back and ask more specific questions.
I’d say Linux Mint is your best bet. It’s easy to use and it works well. Update it after you install it, and then install a new menu applet for it, Cinnamenu (from the applets dialog). It’s much nicer than the default imho.
Opensuse tumbleweed worked with my Dell 2in1 with no dicking around. Give it a shot if other distros aren’t working.
Thank you!
I haven’t gotten the fingerprint sensor to work but from what I understand that is pretty common.
Start with ubuntu live https://ubuntu.com/tutorials/try-ubuntu-before-you-install#1-getting-started,
It boots from a usb stick instead of your hard drive. Try it out and see if you like it or not.
Thank you!
No worries. This whole thing is about the not out of the box experience. :)