Woodworker in US here, and I prefer metric. Also consider the thickness of plywood is actually in metric now - “3/4” is actually 18 mm but they have to market it as 23/32.
I’ve chosen to join the other 8 billion people on earth.
Human scale? Not yours or mines, measures of the ffoot, thumbs and random desires of a dead British King in the far past.
No problem in metrics, at least if I don’t build a hut in the wood with an axe, then maybe using parts of the body for measures are usefull. Not the first furniture I made, also working in metal. Also in mathematic and physic the metric system is way better (Even NASA now uses the metric system since 2 probes crashed on Marte due to calculation errors in the imperial system)
Just wait for an American to tell you how it’s easier to use fractions with imperial. I’ve legit seen them say shit like 3/8 of an inch is easier to think about than 9.5mm.
Are you telling us that you are actually making, say a box, by measuring it with your hands and feet? That’s barbaric!
I’m guessing you actually use a tape measure like the rest of us.
That is what you’re implying by saying that imperial is more intuitive. But if you’re measuring with normal measurement equipment that argument is moot. At that point using imperial is easier for you just because you’re used to it. When normal people have to use imperial for things, all intuition is out the door and it will be hell.
You’re failing to externalise your own experience from the situation. Maybe you should practice that a bit more.
Woodworking, sure. You have a piece of wood 2’ 5 5/8“ long that you need to cut into quarters. Can you calculate that in your head? Metric is SOOOO much easier.
Alternatively, the same measurement is 752.5mm / 4 = 188.1mm, to a practical number of significant figures. No convertions between feet and inches (or ridiculous fractions of inches), and only one calculation.
Yes but my measuring tape actually has 32nds on it. The meter side only has whole divisions, not tenth graduations.
So the sae “ridiculous fraction” is a measurement I can easily make with tools I have on hand to the tools own limit of precision and double check in my head with five seconds of fifth grade level mathematics while the metric one can’t be actually measured without a set of calipers and honestly would merit long division or a calculator to double check and still needs rounding off a vile eighth of millimeter to hit what is in your own words “a practical number of significant figures”.
Imma throw something out there and I hope the earnest admission that I can’t divide 752.5 by four in my head with the level of confidence required to cut materials by is enough to recognize it not as an attack but as a real grasp at understanding:
People who make posts like yours either don’t measure things in any meaningful way (cutting, dividing, scribing lines, etc) or don’t know how to work with fractions.
Like I said: it’s not an attack, I just can’t see how someone would suggest that the metric equivalent to 13/32 is easier to work with unless they didn’t intend to actually measure it or couldn’t do fractions.
It’s easier for handling real things.
Try doing woodwork in feet and inches for a day. Try it in metric for a day. You’ll see what I mean.
It was crafted for the human-scale, whereas metric was worked out on paper by French philosophers.
Woodworker in US here, and I prefer metric. Also consider the thickness of plywood is actually in metric now - “3/4” is actually 18 mm but they have to market it as 23/32.
I’ve chosen to join the other 8 billion people on earth.
Human scale? Not yours or mines, measures of the ffoot, thumbs and random desires of a dead British King in the far past. No problem in metrics, at least if I don’t build a hut in the wood with an axe, then maybe using parts of the body for measures are usefull. Not the first furniture I made, also working in metal. Also in mathematic and physic the metric system is way better (Even NASA now uses the metric system since 2 probes crashed on Marte due to calculation errors in the imperial system)
Just wait for an American to tell you how it’s easier to use fractions with imperial. I’ve legit seen them say shit like 3/8 of an inch is easier to think about than 9.5mm.
Above having to add 3/8, 5/16 and 2/3 inch ¬¬
I doubt it had much to do with kings, as they didn’t do handicrafts or have to measure things like grocers/traders do.
That image is really stupid, too much wrong with it to go thru.
Are you telling us that you are actually making, say a box, by measuring it with your hands and feet? That’s barbaric! I’m guessing you actually use a tape measure like the rest of us.
You and @Zerush both resorted to this fake idea that [not using the metric convention] = [measuring things with your body-parts]
Very weird lie. I’ll take it as an admission you’re out of sensible points.
That is what you’re implying by saying that imperial is more intuitive. But if you’re measuring with normal measurement equipment that argument is moot. At that point using imperial is easier for you just because you’re used to it. When normal people have to use imperial for things, all intuition is out the door and it will be hell.
You’re failing to externalise your own experience from the situation. Maybe you should practice that a bit more.
Woodworking, sure. You have a piece of wood 2’ 5 5/8“ long that you need to cut into quarters. Can you calculate that in your head? Metric is SOOOO much easier.
here’s how i did: 2’/4=6", 5 5/8"/4=1 13/32, so it’s 7 13/32"
smart to pick a prime numerator!
Alternatively, the same measurement is 752.5mm / 4 = 188.1mm, to a practical number of significant figures. No convertions between feet and inches (or ridiculous fractions of inches), and only one calculation.
Yes but my measuring tape actually has 32nds on it. The meter side only has whole divisions, not tenth graduations.
So the sae “ridiculous fraction” is a measurement I can easily make with tools I have on hand to the tools own limit of precision and double check in my head with five seconds of fifth grade level mathematics while the metric one can’t be actually measured without a set of calipers and honestly would merit long division or a calculator to double check and still needs rounding off a vile eighth of millimeter to hit what is in your own words “a practical number of significant figures”.
Imma throw something out there and I hope the earnest admission that I can’t divide 752.5 by four in my head with the level of confidence required to cut materials by is enough to recognize it not as an attack but as a real grasp at understanding:
People who make posts like yours either don’t measure things in any meaningful way (cutting, dividing, scribing lines, etc) or don’t know how to work with fractions.
Like I said: it’s not an attack, I just can’t see how someone would suggest that the metric equivalent to 13/32 is easier to work with unless they didn’t intend to actually measure it or couldn’t do fractions.